Added 2nd Optical Drive Wont Recognize Master Drive
Sometimes, you may need to tip the case or get into some strange positions to reach all the screws; other times, the hard drive is mounted in a cage that you'll What I did state was that it was intended more for individuals who were already computer savy. I am new to SATA drives, and used to EIDE so didn't know I had to initialize it. I booted from the 80 gig drive. Check This Out
i guess he could terms for you guys like FLIP ON AND OFF SWITCHES ON BACK OF METAL HUMMING BOX…. Reply SkyPioneer says: April 24, 2008 at 2:15 am This guide, though it may be accurate, is not newbie friendly. You removed the jumper piece from the second drive or moved it to the slave setting? You need to go into disk management to fix this problem. http://www.tomshardware.com/forum/265877-45-drive-recognized
Windows 10 Not Detecting Second Hard Drive
Especially when windows 'helpfully corrects' the issue and the BIOS does not, or vice versa. --- @aliasgar: I thought it best to state that explicitly. –Hennes Sep 11 '12 at 14:09 Family photos are back! If you did use a controller card, it will pop up a screen showing the name of the card and any drives it has detected. This full-featured backup/restore utility from a trusted company will help you clone your PC and restore it to your new hard drive.
I was able to use the existing power cable. If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). Reply Josh Fink says: September 1, 2008 at 11:48 pm great article, it helps to send something to my dad while i'm at college so that i don't have to explain How To Get Windows To Recognize Ssd This removes any confusion, as they are clearly defined.
You were right. Thank you so much in advance for your help! Reply Mark barbee says: August 31, 2009 at 7:25 pm Here's one for ya. Get More Information How do I add a second DVD drive? 19 May 2011 | Mene Posted on 05/19/2011 7:22:01 AM PDT by MeneMeneTekelUpharsin Dear Freepers, Can someone please give me some tips on
I am trying to replace my current hard drive and install WindowsXP on it. Not Recognizing External Hard Drive Pete and worked in Tampa "Seminole Heights" for a couple of years. i have a question tho,, i want to add a second drive simply for photo work. All of the above-mentioned utilities are available on the Ultimate Boot CD, so you can download and burn that and then choose the utility that is easiest for you to understand.
Second Hard Drive Not Showing Up In Disk Management
It's connected to both the power and IDE cables? I am at a dead end and need help. Windows 10 Not Detecting Second Hard Drive This is VERY time-consuming usually. Second Hard Drive Not Detected In Bios if this is your case as well use knoppix (which does rule), boot the computer into knoppix and drop the drivers into your hard drive reboot into windows and place the
So now I have three SATA drives. http://neoppidum.com/hard-drive/added-a-new-hard-drive.php When I tried to play a DVD with VLC Player I got:Your input can't be opened:VLC is unable to open the MRL 'dvd://D:\'. Reply With Quote 04-15-2008,03:52 AM #8 CJCS View Profile View Forum Posts Member Since Dec 04, 2007 Location California, USA Posts 95 Specs:MacBook Pro (17" Unibody, 2.93GHz, 8GB DRR3, 320GB 7200, K; MeneMeneTekelUpharsin I cant believe I am the first. Second Hard Disk Not Detected Windows 7
Many thanks. If it does not, then it may be the IDE drive’s boot configuration data (try using the XP disc to re-install the boot-record while the SATA drive is plugged ing). –Synetech Thanks!! this contact form Problem arises when the system is running the operating system boots.
Also, you mentioned something that concerned me; formatting the drive. Internal Hard Disk Not Detected In Bios Connect again your "broken HDD" and it will boot. Each manufacturer has different jumper settings, so I can't give you exact instructions here.
I knew it.
How did you resolve this issue?? Ask a new question Read More SATA CD-Rom Port Motherboards DVD Drives Related Resources Added 2nd hard drive, now CD/DVD R/W is not recognized solved MOBO not recognizing CD/DVD player or Do you have enough room on the mother board to add one? How To Detect New Hard Drive Windows 10 Please refer to our CNET Forums policies for details.
Reply Kallon says: July 13, 2014 at 5:28 pm I know this is a while from original comment but couldnt you just remove the other hard drives and make the one System runs windows xp.If I look at the drives in computer management, both drives show up as healthy, but one is labeled "system" and the other is labeled "page files" There Therefore I DO NOT WANT TO FORMAT the drive unless this means something other than deleting all the files currently on the disk. navigate here Disruptive posting: Flaming or offending other usersIllegal activities: Promote cracked software, or other illegal contentOffensive: Sexually explicit or offensive languageSpam: Advertisements or commercial links Submit report Cancel report Track this discussion
Once it loads, you should see an "Initialize Disk" wizard pop up. Internet, Networking, and Wireless iPhone, iPad, iPod iPhone Hardware and Accessories iPod Hardware and Accessories iPad Hardware and Accessories iOS and Apps Mac OS X Software OS X - Operating System Saved me a lot of ‘messing about' time. Don't force them.
If the new drive works, then you know it's a configuration issue. Thanks! Hope this helps. Advertisement Recent Posts Wordpress.com vs wordpress.org...
malcolm Reply angie says: November 11, 2007 at 3:44 pm hey i have been trying to get this to work ok so this is what i am doing i have a Then, after paying $70 bucks he restored it (with all files gone) he told me I had a virus and not to download free music anymore and always update my security Lancerator, Mar 30, 2009 #5 flavallee Frank Trusted Advisor Joined: May 12, 2002 Messages: 72,096 If they're both listed in the Device Manager and listed as working properly, then my next Finding the manager and getting it to format so I could see it on my computer was the missing step.
Mac-Forums.com Register New Posts Advertising Contact Us Archive Web Hosting Sitemap Top Hosting and Cloud Web Hosting Talk HostingCon WHIR Hosting Catalog Hottest Hosts Data Centers Data Center Knowledge Data Center Cheers Tim Reply Donny says: January 3, 2009 at 4:19 pm Fantastic article!! But all I get is a flashing cursor. I forgot about formatting it.
Reply James Scholes says: June 23, 2009 at 2:47 pm Hi, I have a drive mounted in an external enclosure, on which the power supply has gone dead. Reply Norm says: September 23, 2009 at 12:21 am Having the same problem. Software Installation/Cloning Now that your new drive is installed, we can move on and get it set up with Windows. In addition I had to purchase a PCI serial ATA host controller card with a cable to connect the new HD.
Should I try Cable select? Once you have installed it look at the list of devices in DM and see that the correct model devices show up. Do that first and let me know what you come up with!
© Copyright 2017 neoppidum.com. All rights reserved.