Adding And Older ATA HD To My Newer PC
Do This First! crjdriver, Sep 20, 2010 #8 gkannon77 Thread Starter Joined: Jun 10, 2010 Messages: 19 Is that a setting I can find in Disk Management? (The pio vs DMA mode setting) Thanks, There are 3 identical looking connectors – one at either end and one in the middle. the one you just bought at best buy.. http://neoppidum.com/hard-drive/adding-2tb-hd.php
Identify the cables before you actually go ahead, noting which sides face up (SATA data and power cables all have a little notch on one end which means that inserting it I knew the new drive was there and installed correct as I could find it in bios as well as the hardware manager. Reply Janine says: August 16, 2007 at 6:28 pm Many thanks for the VERY SIMPLE step by step instructions for initializing a STA harddrive. I need to get the data off for a friend. hop over to this website
How To Connect Two Hard Disk In One Pc
I had no virus issues either. Most tower cases can have their sides removed with just two screws. Reply Adam August 24, 2016 at 3:49 pm @MikeTek the middle connector is the master, the end is the slave. Reply damnvista says: January 8, 2010 at 10:50 pm well you say vista cant read the drive from ‘my computer' but you dont say how to start a format process… do
The metal the case is built from is thicker than average so the screws I have do not reach to try and install it that way. Card: It says PCI-E controller card, "Masscool" But the software says JMicron JMB36x Family. If I put the old drive in an external drive case, can I clone from this location versus the internal cable? If Your Computer No Longer Works, How Do You Know It Was Your Hard Drive That Failed? i have an old gateway gt5694 id like the extra 500+gb for external storage for my laptop, id like to keep the old files from the drive i.e.
or if one has a lower access speed (8ns and the other 4ns) they both operate at the higher acess speed, thus slowing performance. If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members. B&H Main site Federal Marketplace Students & Educators Government, Education & Corporate Read 800.606.6969/212.444.6615 Help Live Chat The Professional's Source Since 1973 FREE NYC STORE PICKUP Ready Within the Hour >> click site http://www.bhphotovideo.com/c/product/773879-REG/Sabrent_SBT_EKU25_USB_2_0_to_2_5.html reply quote 9 months agoSusan Nelson I have a Seagate Barracuda 7200.10 internal hard drive that was removed from an old computer. Now I need some information from it. It
It's actually quite easy, and certainly worthwhile doing. How To Install Ide Hard Drive Do you still need to have a jumper on the hard drive or does the microboard in the adapter handle that like the new SATA drives do? If you are simply installing a secondary drive, boot into Windows. reply quote 8 months agoJames B If you removed the drive from the Inspiron, and attempted to access it while it was installed in your computer it is very unlikely that
Ide Hard Drive Jumper Settings
Thank you for joining the B&H email list! Great article. How To Connect Two Hard Disk In One Pc Reply sohaib December 31, 2015 at 11:31 am Does the voltage of the hdd matter . How To Connect Ide Hard Drive To Motherboard Someone that explains so even I can do it.
You need a boot floppy from a Windows 98 Second Edition system though. http://neoppidum.com/hard-drive/adding-another-drive-help-me-please.php It will have a thin red line along one edge of the cable. could any one help. The problem is that SATA is new, and the fine details of how it works still vary from motherboard to motherboard; hence, on some motherboards it is possible to have a How To Connect Ide Hard Drive To Sata Motherboard
and i cant figure out how to get past this and what is wrong? One was set vertically in the CS spot. The ribbon cable is usually quite easy to remove. navigate here Check out the things plugged into it.
The product documentation indicates that it can, in fact, be used to mount IDE/SATA-based optical drives.February 14, 2014 Ryan C Since the power and data interfaces are the same, What Is The Voltage Of The Red And Yellow Wires On Most Power Supplies? If not, the new drive will see the old one, but will not access it. You can force the computer to regenerate this record if you wipe out the existing one.
Reply sr.robato_pcola_fl says: March 18, 2009 at 5:11 pm nice article!
Orders placed after 4PM on weekdays will not ship until the next business day. Makes sense, but I just didn't think about it. Login now. Seagate Ide Hard Drive Jumper Settings I got as far as the pop up page showing me the controller card, and the new drive added to the controller card.
I tried to re-set boot priority and drive priority, but I get the same thing. Sorry, there was a problem flagging this post. Thanks! his comment is here These devices are identified as Primary Master, Primary Slave, Secondary Master, and Secondary Slave.Your new machine will probably be using SATA technology on the primary side, and the older PATA technology
from MAXIMUM SPACE AVAILABLE IN MB input the amount you want in SELECT THE AMOUNT OF SPACE IN MB > next > finish this is simple maths extend is + (android The drive you have added has to have it's active partition status changed.Check to see if the jumpers on the drives are set to drive select (DS) or master/slave settings. Should i just go ahead with formatting it as a removable drive? Then too you can always run a Win 2000 repair on the old one or upgrade it to Win XP.
As I said the differences under most circumstances is negligible. The PC requests the information and then waits until it is processed by the drive... Therefore, the people who don't know DO need a guide, but this guide is USELESS to them because THEY WON'T UNDERSTAND IT. Join thousands of tech enthusiasts and participate.
Also just out of curiosity, if you upgrade your hard drive beyond 120gb and say I had a 60gb prior I read somewhere that you would need to purchase a driver reply quote 4 months agoShane C. My old computer died but its IDE drive was perfectly fine so it seemed obvious to me to install the old IDE drive into my new computer as a second drive. I didn't put quite enough thought into my answer, obviously...I was assuming (Perhaps incorrectly) that the drives were both PATA and of the same generation...
I suggest that if readers are willing to search for this topic, then they should also to be able to take a few risks. Solved all my problems putting my new S-ATA HDD in under Vista. the logic is, you'll have to format any storage device to make it ready for use - may it be internal or external like a flash drive. *****using the same way Once I initiated it and partioned it all, was well.
At this stage it is not important to screw in your old drive; you can just rest it somewhere convenient, but don't leave it hanging in midair. Sometimes, though, the power connector can become stuck. Most drives are supplied with the jumper set to cable select - this means that the position of the drive (master or secondary) is dependent on which connector you use. By the fifth sentence, ‘Serial ATA'.
As a matter a fact, it usually crashes, as when I come back to the computer, there is a message saying "windows recovered from an unexpected error". i have all the hook ups but the mother bord is missing the small little blue cord plug. Likewise, bus speed should be taken into consideration when buying a new RAM.
© Copyright 2017 neoppidum.com. All rights reserved.