Adding SATA Drive To Comp With IDE As Boot
I own a sony optiarc dvd burner model ad-7240s-0b. If some one could direct me to a company still putting tabs on their trays that would be a huge help to me. Internal Sata Blu Ray Drive Plugged Into Sata Adding A Third Sata Drive To An Existing Sata Raid Array Sata Hard Drives Boot Problem Does A Sata Drive Make Ide Drive Flag Permalink This was helpful (0) Collapse - Feel free to make a new post. this contact form
You just need a free Molex-style lead (or a Y-splitter). See if an unused SATA port lies nearby on the motherboard or an interface card. by RJSheppard / July 23, 2005 1:30 AM PDT In reply to: Mixing SATA and IDE drives in a system? So, unless additional drivers were offered during installation, you will have to reinstall Windows in order to enable AHCI or RAID Modes. http://www.tomshardware.com/forum/260336-32-adding-sata-storage-boot-system
How To Connect Ide Hard Drive To Sata Motherboard
View Related Posts . . Sata Vs Eide Drive I just replaced a broken dvd drive that had an atapi/e-ide interface for one with a sata interface. There are a few additional considerations to take into account if you are running multiple SATA drives in a RAID array (like making sure all OS's are installed with RAID drivers) Note: I did not hot swap my OS drive as I see that as a bad idea share|improve this answer edited Oct 12 '12 at 20:07 Canadian Luke 16.1k2378128 answered Oct
View 1 Replies . Also, does it matter that i have a eide ribbon connected to the motherboard without anything connected to it? Yet, after installing Windows XP, the computer claims that my free space is only about 130 GB! How To Make Ide Boot Instead Of Sata View Related Posts . .
View 4 Replies . Sata And Ide Hard Drives Together During Vista installation F6 isn't required. If the drives aren't detected correctly, verify that you installed them correctly. http://www.techspot.com/community/topics/cant-boot-from-a-sata-drive-when-an-ide-drive-is-connected.132512/ not terribly obsolete.Intel has released new software for their ICHxR I/O controller hubs:Google "Rapid Storage Technology" +"9.6" e.g.:http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18859&lang=engMRFS MookusJul 23, 2010, 3:20 AM Sorry for the delay, I've been (ugh) away
Sure, you could drop your install cd in the drive, but you'll have better luck if you check a few BIOS settings and run some tests first, both of which we'll Ide Hard Drive Jumper Settings And, where can i look to find which type i need? If the utility lets you select the boot order, give your intended boot drive priority over any other hard drive. Step 4: Configure the BIOS Next, boot into your PC's BIOS-setup utility to verify that it recognizes the new drive and positions it correctly in the drive hierarchy. (Check your PC's
Sata And Ide Hard Drives Together
Too bad Asus doesn't explain the choices in the manual. http://www.ifmdb.com/4dziZyRC-cannot-boot-from-sata-drive.html Flag Permalink This was helpful (2) Collapse - Mixing Drives by kbennett50 / July 23, 2005 7:08 AM PDT In reply to: Mixing SATA and IDE drives I have a mobo How To Connect Ide Hard Drive To Sata Motherboard It was from another pc, so i wiped it (wipedrive pro) and i have it plugged in on my pc. Ide And Sata Drives In Same Computer Posted On: 09-12-2008, 10:58 AM .
Yes, my password is: Forgot your password? weblink Next, look at your current hard drive to see if mounting rails are attached to its sides. Cannot See External Sata Drive Anywhere I have a ide boot drive, along with another ide storage drive currently. Does anyone have any suggestion's as to how i go about setting this up. Motherboard With Ide And Sata Ports
Windows Vista or current versions of Linux will function perfectly in AHCI mode. I've looked all over but couldn't find anything related to this issue online.I finally read your post and remembered that was how I had altered it before(accidentally, about a year and Is it something obvious i'm missing? http://neoppidum.com/hard-drive/adding-a-third-drive-slows-down-boot-up.php Any info would be appreciated.
If you plan to replace your boot drive with the new drive and don't have an empty bay, your upgrade will involve more steps than we can cover here. What Are The Two Goals When Implementing A Raid Solution If you're installing a SATA drive as secondary storage, follow the data cable from your current drive (assuming it's SATA, too) to the other end. Note that I'm not necessarily recommending this boot cd over others, it's just the one that I'm most familiar with.
Join the community here, it only takes a minute.
IDE drives are simpler: They always use Molex connectors. Note: After you are completely finished installing, you can set the hard drive as the first boot device to speed up boot time. Rock solid and stable. How Many Hard Drives Can Be Connected To A Single Ide Cable Internal Sata Drive Shows Up As Removable Drive My sata storage drive on my p4p800 dlx sys.
My suggestion is; if you can afford something like 100 gb or even 80 go for that instead. You can follow him on Google+ if you'd like. He already has a hd installed with a sata connection and his dvd/dvd-rw drives were installed into ide 1. his comment is here Flag Permalink This was helpful (1) Collapse - New computers often handle this well by jrfree / July 22, 2005 6:42 AM PDT In reply to: Mixing SATA and IDE drives
Posted On: December 13th 2008 . Posted On: June 15th, 2006, 07:32 AM . fafner: Oh yes, it is most likely due to your SATA drives. In search of an HDD and IDE storage enclosure that will allow me to plug straight into the MOBO with a SATA connection.
Does that mean I can actually connect it to power and a SATA plug while my computer is running? Flag Permalink This was helpful (0) Collapse - mixing of sata and ide by Ranjan_Ind001 / July 22, 2006 9:23 PM PDT In reply to: Mixing SATA and IDE drives in more stack exchange communities company blog Stack Exchange Inbox Reputation and Badges sign up log in tour help Tour Start here for a quick overview of the site Help Center Detailed This does *not* work.
If you look under Mainboard Tools, you'll find the Memory Tests section, where you can choose from a number of memory tests. solved functioning win7 won't boot if an IDE is drive added Adding an IDE HD to a SATA connector Question about accessing secondary storage hdd ide to ahci switch on boot Any benefits to having a sata vs atapi/e-ide drive? Even though all of my drives are SATA, they occasionally aren't recognized upon boot.
View 4 Replies . After reading up and looking at the assembly portion of building a computer, I would worry about BIOS portion because I hardly find a post explaining this.
© Copyright 2017 neoppidum.com. All rights reserved.